Programming with R

Making choices

Learning Objectives

  • Save plot(s) in a pdf file.
  • Write conditional statements with if and else.
  • Correctly evaluate expressions containing & (“and”) and | (“or”).

Our previous lessons have shown us how to manipulate data, define our own functions, and repeat things. However, the programs we have written so far always do the same things, regardless of what data they’re given. We want programs to make choices based on the values they are manipulating.

Saving Plots to a File

So far, we have built a function analyze to plot summary statistics of the inflammation data:

analyze <- function(filename) {
  # Plots the average, min, and max inflammation over time.
  # Input is character string of a csv file.
  dat <- read.csv(file = filename, header = FALSE)
  avg_day_inflammation <- apply(dat, 2, mean)
  plot(avg_day_inflammation)
  max_day_inflammation <- apply(dat, 2, max)
  plot(max_day_inflammation)
  min_day_inflammation <- apply(dat, 2, min)
  plot(min_day_inflammation)
}

And also built the function analyze_all to automate the processing of each data file:

analyze_all <- function(pattern) {
  # Runs the function analyze for each file in the current working directory
  # that contains the given pattern.
  filenames <- list.files(path = "data", pattern = pattern, full.names = TRUE)
  for (f in filenames) {
    analyze(f)
  }
}

While these are useful in an interactive R session, what if we want to send our results to our collaborators? Since we currently have 12 data sets, running analyze_all creates 36 plots. Saving each of these individually would be tedious and error-prone. And in the likely situation that we want to change how the data is processed or the look of the plots, we would have to once again save all 36 before sharing the updated results with our collaborators.

Here’s how we can save all three plots of the first inflamation data set in a pdf file:

pdf("inflammation-01.pdf")
analyze("data/inflammation-01.csv")
dev.off()

The function pdf redirects all the plots generated by R into a pdf file, which in this case we have named “inflammation-01.pdf”. After we are done generating the plots to be saved in the pdf file, we stop R from redirecting plots with the function dev.off.

We can update the analyze function so that it always saves the plots in a pdf. But that would make it more difficult to interactively test out new changes. It would be ideal if analyze would either save or not save the plots based on its input.

Conditionals

In order to update our function to decide between saving or not, we need to write code that automatically decides between multiple options. The tool R gives us for doing this is called a conditional statement, and looks like this:

num <- 37
if (num > 100) {
  print("greater")
} else {
  print("not greater")
}
print("done")
[1] "not greater"
[1] "done"

The second line of this code uses an if statement to tell R that we want to make a choice. If the following test is true, the body of the if (i.e., the lines in the curly braces underneath it) are executed. If the test is false, the body of the else is executed instead. Only one or the other is ever executed:

Executing a Conditional

In the example above, the test num > 100 returns the value FALSE, which is why the code inside the if block was skipped and the code inside the else statment was run instead.

num > 100
[1] FALSE

And as you likely guessed, the opposite of FALSE is TRUE.

num < 100
[1] TRUE

Conditional statements don’t have to include an else. If there isn’t one, R simply does nothing if the test is false:

num <- 53
if (num > 100) {
  print("num is greater than 100")
}

We can also chain several tests together when there are more than two options. This makes it simple to write a function that returns the sign of a number:

sign <- function(num) {
  if (num > 0) {
    return(1)
  } else if (num == 0) {
    return(0)
  } else {
    return(-1)
  }
}

sign(-3)
[1] -1
sign(0)
[1] 0
sign(2/3)
[1] 1

Note that the test for equality uses two equal signs, ==.

We can also combine tests. An ampersand, &, symbolizes “and”. A vertical bar, |, symbolizes “or”. & is only true if both parts are true:

if (1 > 0 & -1 > 0) {
    print("both parts are true")
} else {
  print("at least one part is not true")
}
[1] "at least one part is not true"

while | is true if either part is true:

if (1 > 0 | -1 > 0) {
    print("at least one part is true")
} else {
  print("neither part is true")
}
[1] "at least one part is true"

In this case, “either” means “either or both”, not “either one or the other but not both”.

Challenge - Using conditions to change behaviour

  • Write a function, plot_dist, that plots a boxplot if the length of the vector is greater than a specified threshold and a stripchart otherwise. To do this you’ll use the R functions boxplot and stripchart.
dat <- read.csv("data/inflammation-01.csv", header = FALSE)
plot_dist(dat[, 10], threshold = 10)     # day (column) 10

plot of chunk using-conditions-01

plot_dist(dat[1:5, 10], threshold = 10)  # samples (rows) 1-5 on day (column) 10

plot of chunk using-conditions-01

  • One of your collaborators prefers to see the distributions of the larger vectors as a histogram instead of as a boxplot. In order to choose between a histogram and a boxplot we will edit the function plot_dist and add an additional argument use_boxplot. By defualt we will set use_boxplot to TRUE which will create a boxplot when the vector is longer than threshold. When use_boxplot is set to FALSE, plot_dist will instead plot a histogram for the larger vectors. As before, if the length of the vector is shorter than threshold, plot_dist will create a stripchart. A histogram is made with the hist command in R.
dat <- read.csv("data/inflammation-01.csv", header = FALSE)
plot_dist(dat[, 10], threshold = 10, use_boxplot = TRUE)   # day (column) 10 - create boxplot

plot of chunk conditional-challenge-hist

plot_dist(dat[, 10], threshold = 10, use_boxplot = FALSE)  # day (column) 10 - create histogram

plot of chunk conditional-challenge-hist

plot_dist(dat[1:5, 10], threshold = 10)                    # samples (rows) 1-5 on day (column) 10

plot of chunk conditional-challenge-hist

Saving Automatically Generated Figures

Now that we know how to have R make decisions based on input values, let’s update analyze:

analyze <- function(filename, output = NULL) {
  # Plots the average, min, and max inflammation over time.
  # Input:
  #    filename: character string of a csv file
  #    output: character string of pdf file for saving
  if (!is.null(output)) {
    pdf(output)
  }
  dat <- read.csv(file = filename, header = FALSE)
  avg_day_inflammation <- apply(dat, 2, mean)
  plot(avg_day_inflammation)
  max_day_inflammation <- apply(dat, 2, max)
  plot(max_day_inflammation)
  min_day_inflammation <- apply(dat, 2, min)
  plot(min_day_inflammation)
  if (!is.null(output)) {
    dev.off()
  }
}

We added an argument, output, that by default is set to NULL. An if statement at the beginning checks the argument output to decide whether or not to save the plots to a pdf. Let’s break it down. The function is.null returns TRUE if a variable is NULL and FALSE otherwise. The exclamation mark, !, stands for “not”. Therefore the line in the if block is only executed if output is “not null”.

output <- NULL
is.null(output)
[1] TRUE
!is.null(output)
[1] FALSE

Now we can use analyze both interactively:

analyze("data/inflammation-01.csv")

plot of chunk inflammation-01plot of chunk inflammation-01plot of chunk inflammation-01

and to save plots:

analyze("data/inflammation-01.csv", output = "inflammation-01.pdf")

This now works well when we want to process one data file at a time, but how can we specify the output file in analyze_all? We need to substitute the filename ending “csv” with “pdf”, which we can do using the function sub:

f <- "data/inflammation-01.csv"
sub("csv", "pdf", f)
[1] "data/inflammation-01.pdf"

Now let’s update analyze_all:

analyze_all <- function(pattern) {
  # Runs the function analyze for each file in the current working directory
  # that contains the given pattern.
  filenames <- list.files(path = "data", pattern = pattern, full.names = TRUE)
  for (f in filenames) {
    pdf_name <- sub("csv", "pdf", f)
    analyze(f, output = pdf_name)
  }
}

Now we can save all of the results with just one line of code:

analyze_all("inflammation")

Now if we need to make any changes to our analysis, we can edit the analyze function and quickly regenerate all the figures with analzye_all.

Challenge - Changing the behaviour of the plot command

  • One of your collaborators asks if you can recreate the figures with lines instead of points. Find the relevant argument to plot by reading the documentation (?plot), update analyze, and then recreate all the figures with analyze_all.

Answers to challenge exercises: cond-answers.R